3 Main Reasons Your iPad Wont Turn On

April 13, 2021

Repair Now

Shop Now

Call Now

3 Main Reasons Your iPad Wont Turn On

It is very frustrating when you want to check your urgent email or take a photo but your iPad won’t turn on. You might think that your tablet won’t turn on again or that you need an expensive iPad repair.Even though Apple users can sometimes face issues and performance flaws with their devices, even though iPads have a reputation for quality as a company. Below are some common reasons your iPad won’t switch on and their simple solutions.

There are several potential reasons why your iPad may refuse to turn on, ranging from simple issues to more complex hardware problems. Let's delve into a detailed description of these possibilities.

1. Battery Depletion:

One of the most common reasons is a completely drained battery. If your iPad has been unused for an extended period or the battery is old, it might take some time for the device to respond after connecting it to a power source. Give it a few minutes to charge before attempting to turn it on.

2. Faulty Charging Cable or Adapter:

A damaged or incompatible charging cable or adapter can hinder the charging process. Ensure you are using an Apple-certified charger and cable. Try an alternative charger to rule out this possibility.

3. Software Glitches:

Sometimes, software glitches can prevent your iPad from turning on. Attempt a force restart by holding down the Power button and Home (or Volume Down) button simultaneously for about 10 seconds. For iPads without a Home button, press and quickly release the Volume Up button, then the Volume Down button, and finally, press and hold the Power button until the iPad restarts.

4. iOS Update Issues:

If an interrupted or unsuccessful iOS update occurred, it might lead to startup problems. Connect your iPad to iTunes or Finder on a computer, initiate a restore, and follow the on-screen instructions to reinstall the operating system.

5. Hardware Malfunctions:

Physical damage, like a drop or exposure to water, can cause hardware malfunctions, preventing your iPad from turning on. Inspect the device for visible damage and consider seeking professional assistance if needed.

6. Faulty Power Button:

A malfunctioning power button might be the culprit. Check if the button feels loose or unresponsive. If so, it may require repair or replacement by an authorized service provider.

7. Overheating:

iPads have built-in mechanisms to prevent overheating. If your device gets too hot, it may refuse to turn on until it cools down. Ensure your iPad is not exposed to excessive heat.

8. Faulty Display:

While the iPad may be turning on, a malfunctioning display can give the impression that it's not. Connect the iPad to a computer and check if iTunes or Finder recognises it. If it does, the issue might be with the display.

9. Motherboard Issues:

Rare but possible, internal components on the motherboard can fail. If you've ruled out other possibilities, and the iPad still won't turn on, professional diagnostics may be necessary.

10. Liquid Damage:

Exposure to liquids can lead to internal corrosion, causing the iPad to malfunction. If your iPad has come into contact with liquid, it's crucial to seek professional assistance promptly.

In conclusion, troubleshooting the reasons behind your iPad not turning on involves a systematic approach, considering both software and hardware factors. If basic troubleshooting steps don't resolve the issue, consulting Apple Support or visiting an Apple Store may be the next best course of action.

3 Main Reasons Your iPad Wont Turn On

Situation 1: Your iPad is not turning on or charging.

If your iPad is not turning on or even charging, it could be because of your charger, corrupted software, or physical damage. If you are experiencing this kind of issue, try the potential solutions one after the other. Solution 1: Examine your iPad's charger. Sometimes your iPad cannot charge and/or turn on because of a faulty charger. Borrow a charger from a friend or colleague and see if the iPad turns on. If you find your charger to be faulty, then buy a new one. Solution 2: Check your iPad’s lightning port Carefully inspect for dust buildup in your iPad's lightning port and clean any debris or dirt with a toothpick or, preferably, a soft brush. Solution 3: Force restart your iPad. Another way to solve a software crash issue is to force restart your iPad. Solution 4: Restore your iPad with iTunes The next solution is to restore your iPad with iTunes, as, apart from managing your music, iTunes is useful for backing up and restoring iOS devices. Solution 5: Inspect the building for physical damage and seek professional assistance. A simple visual inspection will help you identify physical damage like a cracked screen or moisture between the layers of the screen. If this is the case, get professional help from iPad repair specialists like ImFixed and get your iPad back to its original condition.

Situation 2: Your iPad charges but wont turn on.

Sometimes your device will charge OK but won’t turn on or boot up. This situation arises because of a software issue or physical damage. The steps below might solve the issue. Solution 1: Make sure your iPad is not in sleep mode. Solution 2: Reset your iPad to its factory settings. Solution 3: Restore your device with iTunes

Situation 3: My iPad wont turn on even when plugged in.

This is the most likely situation when you have completely drained the iPad’s battery, or if the iPad has a software or hardware issue. Follow the process below and try to solve the problem. Solution 1. Plug in your iPad and charge it for a few minutes before turning it on. Solution 2: Reset your iPad to its factory settings. If you are still having issues with your Apple iPads, please contact us at info@imfixed.co.uk or call us on 01204520520.

When faced with the frustrating situation of an iPad that won't turn on, it's essential to remain calm and methodically troubleshoot the issue. Here's a detailed guide on what to do when your iPad refuses to power up.

1. Check the Battery:

Start with the basics. Ensure that the iPad's battery isn't completely drained. Connect it to a power source using a genuine Apple charger and cable. Allow it to charge for at least 15–30 minutes before attempting to turn it on.

2. Inspect the Charging Cable and Adapter:

Faulty or damaged charging accessories can hinder the charging process. Use an Apple-certified charging cable and adapter. If possible, try an alternative charger to rule out any issues with the accessories.

3. Force Restart:

Perform a force restart to address potential software glitches. For iPads with a Home button, hold down the Power button and the Home button (or Volume Down button on newer models) simultaneously until you see the Apple logo. For iPads without a Home button, quickly press and release the Volume Up button, then the Volume Down button, and finally, hold down the Power button until the Apple logo appears.

4. Connect to iTunes or Finder:

If the force restart doesn't work, connect your iPad to a computer using a USB cable. Open iTunes (or Finder on macOS Catalina and later). If your iPad is recognized, you might be prompted to update or restore it. Follow the on-screen instructions to proceed.

5. Check for Software Updates:

Ensure that your iPad's operating system is up-to-date. If possible, check for and install any available software updates. Outdated software can lead to performance issues and startup problems.

6. iPad in Recovery Mode:

If iTunes or Finder prompts you to restore your iPad and you don't have a backup, you might need to put your iPad in recovery mode. Follow the instructions provided on the screen.

7. Inspect for Physical Damage:

Visually inspect your iPad for any signs of physical damage. A cracked screen, dents, or other visible damage may be indicative of underlying issues. If the iPad has suffered physical trauma, professional repair may be necessary.

8. Check Power Button and Volume Buttons:

Ensure that the power button and volume buttons are functioning correctly. If any of these buttons are damaged or unresponsive, it can affect the iPad's ability to power on.

9. Temperature Considerations:

iPads have mechanisms to prevent overheating. If your device becomes too hot, it might not turn on until it cools down. Remove it from direct sunlight, let it cool, and then attempt to power it on again.

10. DFU Mode (Device Firmware Update):

If all else fails, you can try putting your iPad in DFU mode. This is a more advanced troubleshooting step and should be approached with caution. Follow specific instructions for your iPad model to enter DFU mode, then connect it to iTunes or Finder for a restore.

11. Seek Professional Assistance:

If none of the above steps resolve the issue, it's time to consider professional help. Contact Apple Support or visit an Apple Authorized Service Provider. They can conduct a thorough diagnosis and provide guidance on potential repairs.

12. Backup Your Data:

If your iPad requires a restore or service, it's crucial to have a recent backup. Use iCloud or iTunes/Finder to ensure your data is safely stored before proceeding with any troubleshooting or repairs.

In conclusion, troubleshooting a non-responsive iPad involves a combination of basic checks, software-related actions, and, if necessary, more advanced procedures. Patience and a systematic approach are key to identifying and resolving the underlying issue. If uncertainties persist, seeking assistance from Apple's support services or authorized professionals is recommended.

If your iPad refuses to turn on, several troubleshooting steps can be attempted before deciding whether to address the issue yourself or seek professional help. Begin by checking the basics: ensure that the iPad has sufficient battery charge and attempt to charge it using a different cable and power source. If this doesn't work, try a hard reset by holding down the Home button and the Power button simultaneously until the Apple logo appears.

If these initial steps fail, consider connecting your iPad to iTunes on a computer and attempting a restore. Follow the on-screen instructions in iTunes to restore your device to factory settings. Keep in mind that this process will erase all data on your iPad, so make sure you have a recent backup.

Should these DIY methods prove unsuccessful, it might be time to consult a professional. Visit an Apple Store or an authorized service provider to get a comprehensive diagnosis of the issue. They have the expertise and tools to identify and resolve hardware problems that you might not be able to tackle on your own.

In summary, start with basic troubleshooting steps like checking the battery and performing a hard reset. If those don't work, attempt a restore using iTunes. If all else fails, seeking professional help from an authorized service provider is recommended for a thorough assessment and potential repair.

FAQs:

Q1: Why is my iPad not turning on even after charging it?

The issue could be a completely drained battery. Connect your iPad to a power source using a genuine Apple charger and cable. Wait for at least 15–30 minutes to ensure the battery gets a charge. If the battery is still functional, your iPad should power on.

Q2: What should I do if my iPad doesn't respond after a force restart?

If a force restart doesn't work, try connecting your iPad to a computer using a USB cable and launch iTunes or Finder. If recognized, follow the on-screen instructions to update or restore your iPad. This can address software glitches that might be preventing the device from turning on.

Q3: My iPad fell, and now it won't turn on. What could be the problem?

A fall could have caused physical damage, affecting internal components. Inspect your iPad for visible damage. If you find any, it's advisable to seek professional assistance for a thorough evaluation and potential repair.

Q4: Can a faulty power button prevent my iPad from turning on?

Yes, a malfunctioning power button can be a culprit. Check if the power button feels loose or unresponsive. If so, the power button may need repair or replacement. It's recommended to consult with a professional for hardware-related button issues.

Q5: What steps should I take if my iPad doesn't turn on after exposure to liquid?

Liquid exposure can lead to internal corrosion and malfunction. Immediately disconnect your iPad from any power source and do not attempt to turn it on. Instead, seek professional assistance promptly to assess and address potential liquid damage. Continuing to use the iPad without proper evaluation can worsen the situation.